Additional details
- 4G LAN / WiFi connection optional
- Provider change possible at any time
- E.g. Böhnke+Partner, Kollmorgen, KW, L+L, Newlift, Rekoba, RST, Strack etc.
IP version, protective housing IP64
| EA-LTE-IP-GATW | Order no: 100.0802BL |
| EA-LTE-IP-LIGHT-GATW | Order no: 100.0801BL |
DIN version | |
| EA-LTE-DIN-GATW | Order no: 1xx.0812BL |
| EA-LTE-DIN-LIGHT-GATW | Order no: 1xx.0811BL |
The differences between the full version and the light version can be found via the Specifications tab
From 2024, all Gateways will be delivered as EA-LTE-DUAL
The new DUAL is fully compatible with Gateway and NANO installations and offers a wide range of additional functions.
The Leitronic gateway is available in a DIN and an IP version. The robust IP version is intended for simple installation in the machine room and the compact IP version for installation in the control cabinet.
In combination with our roaming-capable Leitronic SIM cards, very good network coverage up to Voice over LTE is possible.
The devices are supplied incl. antenna.
With the pre-charged battery and Leitronic SIM card, you can quickly find a mounting location with cellular reception. The signal quality is displayed via 5 LEDs. In difficult conditions, the EasyConfig APP helps to find the optimal antenna location, provider or antenna alignment.
IP and DIN version
- The IP version is rubust, waterproof and intended for wall mounting
- The DIN version is compact and intended for the control cabinet
IP version
- Power supply: 230 VAC / 50 Hz / max. 15 W
- Standby: 3.5 W
- + 2.5W during connection
- + consumer to 12VOUT
- + consumer to EL
- + consumer to SIR
- + 5 W during battery charging (max.)
- Ready-Contact
- Emergency battery: 12 V / 1.2 Ah (100.0880)
- Charging time: 8 h typical
- Dimension (W x H x D): 182 x 180 x 63 mm
- Housing: ABS, IP67
- Weight: 650 g (without battery)
DIN version
- Power supply: 14.3 VDC +/- 0.15 V
- Standby: 1.5 W
- + 2.5 W when connected
- + consumer to 12VOUT
- + Consumer to EL
- + Consumer to SIR
- + 5 W during battery charging (max.)
- Emergency battery: 12 V / 1.2 Ah (100.0880)
- Charging time: 8 h typically
- Dimension (W x H x D): 45 x 118 x 138 mm
- Housing: DIN
- Weight: 400 g (without battery)
Support for the following networks:
- 4G: GSM, UTMS, LTE/VoLTE
- 3G: GSM, UTMS
- 2G: GSM
Power supply
DIN Switch Mode Power Supply EA-ACDC-USV
Operating voltage: 230 VAC +-15%,
Output voltage: 14.3 VDC / 10 W
Order no: 118.0117
DIN Switch Mode Power Supply EA-DCDC-USV
Operating voltage: 16 to 35 VDC
Output voltage: 14.3 VDC / 10 W
Order no: 118.0118
DIN Switch Mode Power Supply EA-DCDC-USV isolated
Operating voltage: 9 to 35 VDC,
Output voltage: 14.3 VDC / 10 W (isolated)
Order no: 118.0119
12V lead battery
Voltage: 12 V DC
Capacity: 1.2 Ah
Order no: 100.0880
DIN holder for battery
(without battery)
Order no: 100.0881
Antenna material
Wall antenna
Cable 5m SMA
Weatherproof
Order no: 100.0864
Directional antenna
Cable 5m SMA
10dBm gain
Weatherproof
Order no: 100.0866
Antenna extension cable
2.5m SMA Order no: 100.0862 |  | |
10m SMA Order no: 100.0863 | | |
5m SMA Order no: 100.0865 | |
Emergency light
Emergency light LED chain, 10cm
techn. data: 12 V DC +/- 15% / 0.8 W / 52 lm (16 cd 120°)
Dimension: 117 x 9 x 9 mm (L x W x H)
Connections: Plug/screw terminal
52Lumen
10 cm, self-adhesive
Order no: 100.0870
Emergency light LED chain, 2x10cm
techn. data: 12 V DC +/- 15% / 1.6 W / 104 lm (16 cd 120°)
Dimension: (100+117) x 9 x 9 mm (L x W x H)
Connections: Plug/screw terminal
104 lumens
2x10 cm, self-adhesive
Order no: 100.0873
Emergency light LED screw
techn. data: 12 V DC +/- 15% / 0.2 W / 4 lm (44 cd 20°)
Waterproof
Screw IP67, M8
Order no: 100.0872
LED module, self-adhesive
techn. data: 12 V DC +/- 15% / 1.2 W / 50 lm
Dimension: 37 x 32 x 5 mm (L x W x H) also screw mounting possible
Cable: 8cm between the elements (delivery as chain possible)
Order no: 100.0874
Data interfaces for various elevator controls
4xLAN WIFI-IP for 4G/LTE | IP chassis
Passes Internet connection of the SIM cards.
4 Ethernet-Ports + 2.4GHz Wifi.
Power supply from 100.08x2BL. IP housing.
Order no: 100.0840
Instruction manual4xLAN WIFI for 4G/LTE | desktop device
Passes Internet connection of the SIM cards.
4 Ethernet ports + 2.4GHz Wifi.
Power supply from 100.08x2BL.
Tabletop unit.
Order no: 100.0841
1xLAN WIFI for 4G/LTE
Passes SIM cards internet connection to any devices.
1 Ethernet port + 2.4GHz Wifi
Power supply from 100.08xyBL
Order no: 100.0842
Instruction manualData-Modul-DB9
E.g. Newlift DB9
Order no: 100.0850
Data-Modul-USB
E.g. Böhnke+Partner
USB isolated
Order no: 100.0851
Other accessories
Remote-Ready
Monitors the condition in multiple systems based on the telephone line.
Adjustable alarm delay.
Order no: 100.0410
SIM card with VoLTE roaming*
EU: Foreign providers | *CH: Swisscom (VoLTE), Sunrise, Salt
The Leitronic M2M SIM supports ALL CH networks → best possible coverage
No roaming additional costs even in neighboring countries
The inclusive services are pooled across all active SIM cards
Leitronic Portal for routine monitoring included
Free, competent support via Leitronic Infoline
For a consultation, we are also available by phone for you
Order no: M2M-SIM